Q: How does NIPS block traffic from a specific IP address or allow such traffic to pass? A: From version 5.6R11, NIPS introduces the global blacklist and whitelist. NIPS deems traffic from IP addresses in the global blacklist to be malicious by default and directly blocks such traffic. As for...
Category: Knowledge Base
How to Power Off ADS M Portal Properly
To ensure proper shutdown of the ADS M Portal, it is recommended to synchronize memory data with the hard disk before initiating a shutdown. The command for this is sync. Failure to do so may result in data loss. After synchronization, you may proceed with the shutdown command for power...
Configuring TCP Flood Protection on NSFOCUS WAF
According to the working principle of TCP/IP, only a certain amount of TCP/IP connections are allowed. Attackers exploit this to launch TCP flood attacks, which are divided into two types: SYN flood attacks An attacker sends too many SYN packets to a target server for processing, exhausting the server's resources...
Packet Forwarding Mode
The packet Forwarding Mode is mainly used for debugging network faults. If this function is enabled, it indicates that the ADS device will directly forward network packets without any checks. The Packet Forwarding Enable feature can be reminded through the ADS webpage if this function is enabled. If you want...
Configuring Network-Layer Access Control on NSFOCUS WAF
The network-layer access control function mainly controls the network layer and transport layer. It is a firewall function. NSFOCUS WAF incorporates this function to enable users to configure network-layer access controls on WAF. This function is available only when NSFOCUS WAF is deployed in in-path or out-of-path mode, but unavailable...
Communication Port Between ADS M & Portal
Scenario Integrate Portal on the External Network with ADS M on the Internal Network. Required Ports The Portal has a dedicated public IP address. ADS M intranet uses a single public egress IP for external connectivity, and any access to the public network must go through this IP. To establish...
